Embedded Power Line Carrier Modem
The PLC communication modem embedded in the IDC2000 ICs is a two-way half duplex transmission based on Systel property spread-spectrum PLC method. Its main specifications are as follows:- High Input Sensitivity: 10mV
- Excellent Noise Suppression: 10-10 BER versus S/N 6db
- Communications Rate: 2 - 4 Kbits/sec
- Carrier Frequency: 100KHz- 200KHz
PLC Modem Functional Block Diagram
Mains Synchronization
The DPLL implemented in the IDC2000 is a configurable digital phase lock loop module aimed at synchronization to the line zero cross in power electronic systems or for sensing communication signals in noisy environment.The DPLL enables a jitter-free synchronization to the mains. It serves mainly as a packet synchronization means for the PLC communication but can be used for other applications (UPS, etc.).
DPLL Functional Block Diagram
Related documents |
|||||
|---|---|---|---|---|---|
 |
IDC2000 IC family Data Sheet Updated on April 10, 2007 |
||||
Trademarks
The Digital Power Control Pioneers